HJT 12/24-630A Shielded End-Connector

General Information

630AT Back connector can be use together with the T Fore connector and some other back connector , it can be provide more branches, and they can not together with the bushing directly, cover the back protection cap on the end of the blanking cover.

Product Features 

1,Provides a fully screened and fully submersible separable connection when mated with the pro per bushing or plug.

2,Can be used underthe circumstances.

3,Built-in capacitive test point to determine the circuit status or install a fault indicato r.. No minimum phase clearance requirements.

4,Mounting can be ve rtical, horizontal, or any angle in between.

Product Structure

1. TWO HEAD SCREW: To make sure have a good contact with the apparatus bushing.
2. INSULATION: Moulded EPDM insulating rubber is form ulated and mixed in-house to ensure high quality.
3. INSULATING PLUG: Mold ed epoxy insulating plug provides excellent electrical, thermal and mechanical reliability.
4. SEMI-CONDUCTIVE INSERT: Moulded EPDM conducting rubberscreen controls electrical stress.
5. STRESS RELIEF: The configuration of the outer screen and the cable adapter provide cable stress relief.
6. GROUNDING EYE: Moulded intothe externalscreen for connection of an earthing wire.
7. Out Semi-conductive shield: The combination of the prefabricated EPDM conductive rubber and cable shielding can realize the shielding continuity

and ensure the outer semi-conductive layer is grounded.

8. Crimping terminal: All copper or copper aluminum crimping terminals are suitable for copper or aluminum conductors.